Amazing new PLAZMA combines stunning detail with dynamic performance!
The potential of the PLAZMA Ra has been unleashed at electric racing events around the world and developed a reputation as a trend leader in 1/12 electric racing machines. Now a new star has risen with the PLAZMA Lm that incorporates the racing DNA of the PLAZMA Ra with the stunning detail and scale parts of MINI-Z class models. To deliver on the concept of a scale model with high-level performance, rubber tires have been replaced with sponge tires while maintaining the highly detailed scale form in a kit packed with racing features. From racing circuits to parking lots, the power of the PLAZMA Lm is on display.
PORCHE 962C scale body includes bolt-on front/rear LED light base, door mirrors, wipers, and antenna and dummy duct intake parts. |
Includes two bodies. Plain body for you to paint as you like and a printed semi-completed body that takes only a short time to finish. Simply apply sponsor logos and install decorative scale parts. |
Features the same king pin & coil spring-type suspension on front as the PLAZMA Ra. Natural FRP T-Bar governs the rear with pitching and side roll damper that requires minimal adjustment and maintains the settings for a long period. |
Pitching is regulated through a center shock with a fixed volume diaphragm + roll is controlled via a friction tube. (Kyosho logo lazer etched) |
Main parts such as aluminum motor mount are lightweight and anodized in KYOSHO’s signature red color. |
Equipped with large plastic diffuser for improved rear traction. Can be removed with three screws when not used. |
Drive shafts fully equipped with ball bearings. (total 9) |
Brush-type G20 motor installed. |
- Rear ride height can be adjusted to 5 levels with 1mm spacers on the rear axle.
- 10. Radio compartment is large enough to comfortably fit standard size servo, ESC and receiver. (Mini-servo from Ra can also be installed).
- Smooth ball diff from the PLAZMA Ra is included as standard.
- Features pre-glued sponge tires that deliver strong grip on all surfaces. KYOSHO RACING and degree of hardness are printed on sides of tires. 【H-38】 H indicates H rubber (material) and 38 is degree of hardness.【L-25】 L indicates L rubber (material) and 25 is degree of hardness.
Unrestricted battery choice with a multi design
|
PLAZMA Lm does not restrict the type of battery to be used. Two battery holders included can suit most NiMH, Li-Po and Li-Fe batteries available on the market. From slightly older and larger 7.4V Li-Po’s to the latest ORION TS and RC PLANNING R246 Muscle Power series batteries or short size and 1-cell size Li-Po batteries used in 1/12 racing, nearly all batteries for 1/12 and 1/10 models can be installed.
|
|
< Kit Contents >
|
< Required for Operation >
|
Chassis Technical Data
|
Length | 410mm |
Width | 172mm |
Wheelbase | 233mm |
Tire(F/R) | 56.0x36.5mm/54.0x36.5mm |
Gear Ratio | 1:3.875 (24T/93T) |
Weight | 900g approx. |
Motor | G20 motor |